Silverback Storm 90

Outline

The design blueprint of the Silverback Storm features a highly distinctive, compact, and ultra-stubby outline. It is engineered to prioritize massive low-end power, immediate response, and drastically reduced swing weight.The technical breakdown of the Silverback Storm's outline consists of the following key design elements:1. Ultra-Short and Stocky Overall Length

  • Reduced Swing Weight: The Storm features a heavily truncated overall length, scaling around 210 cm at a volume of roughly 90 ltrs.
  • Maximum Air Agility: Shaving inches off the nose and tail pulls the board's mass closer to the rider's stance. This provides the signature "compact" feeling required to whip the board through radical rotations, loops, and freestyle air acrobatics without losing momentum.

Parallel Rail Profile with Generous Center Width

  • Straight, Stable Rails: To compensate for its short length, the outline utilizes relatively straight, parallel mid-sections.
  • Early Planing & Upwind Drive: Keeping the rails parallel through the center increases the effective planing surface and waterline. This gives the Storm its signature gorilla-like horsepower—allowing it to track effortlessly upwind through heavy current and pop onto a plane instantly in marginal wind gusts.











Bottom Shape

3. Wide, Power-Packed Tail Block

  • Parallel Tail Expansion: The Storm maintains its width far back into the rear stance rather than tapering into a traditional narrow pin-tail.
  • Chop-Launching Lift: The extra surface area under the back foot provides a massive platform to push against, acting like a hydraulic spring to snap an aggressive pop off the tiniest chop.

4. Extreme Back-Foot Pivot Stance

  • Off-the-Tail Riding: The outline dictates that the rear footstrap sits almost entirely on top of the tail block, right above the compact multi-fin cluster.
  • Turn-on-a-Dime Agility: Stepping back allows the rider to instantly break the parallel line and engage the rail, executing ultra-snappy, lightning-fast jibes and radical, carving turns with precision.

5. Streamlined, Pointed Nose Entry

  • Minimal Wind Resistance: Up front, the outline draws into a lighter, more pointed nose profile.

6. Double concave & slight V throughout the full length.










Scope Rocker Line

The Scope Rocker Line has been re-engineered with a flat center-to-tail profile, transforming the Silverback Storm into an absolute high-end speed machine while retaining its radical control. By extending the flat line all the way through the back, the board maximizes water release and top-end acceleration.The architectural profile of this high-speed rocker line breaks down into three distinct zones:1. The Speed Demon: Flat Center-to-Back Line

  • Maximum Top-End Speed: Eliminating the tail kick creates an uninterrupted, ultra-low drag surface from the mid-section all the way to the tail, allowing the board to reach blistering top speeds.
  • Locked-In Stability: The continuous flat profile acts as a hydrofoil stabilization pad, keeping the board perfectly level and glued to the water even when fully sheeted in during terrifying high-wind gusts.
  • Instant Passive Planing: Without a tail curve to create drag, the board slips onto a plane effortlessly the moment the wind hits the sail.
  • Blazing Jibe Exit: In the jibe, this flat tail maintains maximum momentum, shooting you out of the turn with zero loss of speed.